VFD48 Round VFD Module For ARDUINO/51/AVR/STM8S/STM32 etc.

For the VFD48-1202Fn panel datesheet,Visit:

http://vfdclock.jimdo.com/2013/02/02/vfd-flat-screen-datasheet-archive/

How to connect 5V VFD48 Module with 3V3 MCU

Specifications:

Panel Name: BOE VFD48 (Made in the P.R.C.);
Panel Size: :68mm(L)*48mm(W)*8.5mm(T);

Module Supply: 5V DC via Arduino or USB;
Working Current: ~200mA;
Module Size:70mm(L)*55mm(W)*15mm(H);
PCB Size:70mm(W)*55mm(H);
PCB Color: Black;
Weight:56g;
The vfd48 module also works with STM8S/STM32/PI/51/AVR etc.;

The module works with any 5V DC MCU, especially designed for ARDUINO!

 Features:

1). 5V Ready, easy to be used. Can connect to your ARDUINO UNO board with only 3 signal wires;

2). High efficiency power circuit, no transformer, no heat, Low HV, very safe, High Brightness;

3). All SMT components, very thin PCB, easy to drive;

4). All segments in the VFD panel can be lighted up;

5). Module contains a self-test jumper, when shut the jumper and then plug the power on, the module will enter the self-testing module, no need other MCU, easy to check module's condition;

6). Contains over-current protection, and reverse connection protection circuits;

7). Open source ARDUINO NUO source code, pure C code, provide high level function, easy to be used;

9). Simple 3-wire SPI interface, with EN pin, support adjusting the global brightness and shutdown the High Voltage and Filament Supply completely.

Interface:
3-wire SPI:
+5V
GND
DIN
CLK
LATCH(STROB)
EN - (optional)High voltage & filament supply enable

Std. 0.1”(2.54mm) 2*3Pins;