SLIM-8W-High Voltage Power Module-12Vto170V-MC34063-OpenHardware

Eagle source Files are inside the PDF file blow,please use Acrobat reader from adobe to open the PDF file,will find all files inside attach part of PDF. Others PDF reader may not be able to find the attached files inside PDF.

When save the attach file,Please rename the SLIM12D.rar.txt back to SLIM12D.rar, then open it with winrar.

You can find the password of PDF inside the parcel.

The Module can light up 6~8pcs IN-18 NIXIE tubes at the same time.

New-Slim 8W-34063 Based High Voltage for NIXIE

1.High efficiency,High power,up to 8W(Max);
2.Small size PCB,29.5mm(L)*16mm(W)*7mm(H) only;
3.Highly optimized circuit, high quality key components;
4.Open hardware design;

THIS MODULE CONTAINS DANGEROUS, HIGH VOLTAGE POTENTIALS. USE CAUTION.
DO NOT TOUCH ANY PART OF THE MODULE WHEN IT IS WORKING.

Tips:
1. Please control the input current in <=0.8A for the low heat working state,if need more power output,you can increase the input voltage;
2. Please use high quality and stable input DC source,make sure no over the MAX input voltage;
3. Module contains input reverse polarity protection;
4. For the heavy loader,the max output voltage may get drop,it's normal;
5. Module contains an optional /EN pins to turn the module HV output ON/OFF,can be controlled by 3V3 or 5V mcu GPIO; when set this pin to H,will turn the module HV output off,when float or set to L,the module will back to work;

Description:
This high voltage power converters are typical boost converters based on 34063 chip which can accept 10 to 15V DC input,and output up to ~170V DC .
We recommend work with 12Vin,and with <8W output;

Typical Usage:

For driving NIXIE Tubes.

Typical Parameters:
(For reference only)

Input: 10V~15V DC, recommend 12V;
Output: ~170V DC;
Output Current(MAX): 40mA;
Max Power Intput: 8W;

Module size: 29.5mm(L)*16mm(W)*7mm(H); (~7mm height contains bottom equipment+PCB+top equipment total).