5V ready OLED-1602 module for ARDUINO via IIC

OLED1602 Module for

Arduino /AVR/PIC/STM/ARM/PI 5V ready

Specifications(For reference only):

PCB Size: 82mm*22mm;

PCB color: Green/Black;

OLED Panel Size: 68.5mm*17.5mm;

Active Area: 2.26";

Panel Color: Blue;

Weight: ~12g;

Supply Voltage: 3V3~5V;

1). 5V Supply + 5V IO;

2). 3V3 Supply + 3V3 IO;

3). 5V Supply + 3V3 IO; (!!!No recommend! On your own risk!!! May work with some STM32 MCU Pins that survive under 5V IO,recommend add 1K resistors in serial with IIC pins);

Max Current: ~100mA;

Port: IIC (4k7 IIC pull-up resistors on PCB.);

Pins:

VDD +3V3~+5V;

SDA: IIC data pin;

SCK: IIC clk pin;

GND: Ground;

--------Optional pins(May not exist,depends on PCB version!!!)-----

HVEN: turn HV on/off(Optional);

/RESET: reset pin(Optional);

The module works with any 5V DC MCU,especially designed for ARDUINO!

Features:

1). 5V Ready,easy to be used.Can connect to your ARDUINO UNO board with only 2 signal wires;

2). High Brightness,no heat;

3). All SMT components,very thin PCB,easy to be drived;

4). Contains over-current protection and reverse connection protection circuits;

5). Open source ARDUINO UNO source code,pure C code,easy to be used and ported;

For video(s):

HTTPS://youtu.be/i9q9lQ41UB0

For more information:

HTTP://vfdclock.jimdo.com

The source code is for ARDUINO UNO,running in ARDUINO V1.04.

Please use Acrobat Reader from ADOBE to open this PDF file,then you can find the source code in the PDF attachment.